|
Blazing Heavy Duty Waterproof Splice Connector
|
click on image to zoom
Blazing
Waterproof Splicers
LV-9000
Snap-Locking
Waterproof Connectors with Pre-Filled Silicone
(Formerly known as SNAPLOC Low-Voltage Wire Connectors.)
- Best
low-voltage connections for underground dog fences, landscape lighting,
irrigation & more...
- 100%
Waterproof
- Quick,
compact and easy!
Blazing
Wire Connectors are the low-voltage wire connectors designed for the
professional pet fence installer. Unlike twist-on connectors, you never have
to doubt the connection.
Superior
Performance When it Counts Snap-Locking connectors eliminate common install
problems:
- Locking
- Never loosens or dangles off wires
- Foolproof
- Never fails to grab the wires
- Easy
- Compact 5-second installation
- No
Mess - Silicone encapsulates connection and will not melt out
- No
Tunneling Effect - No channel for moisture to follow into the connection
- Vibration
Proof - Connection stays secure
Locks
Tight with Double O-Ring Seals
Just
squeeze and lock to hydraulically pump and pack waterproofing silicone.
Pre-filled silicone fully encapsulates all bare wires, closing all entryways
against moisture and corrosion. A double O-ring seal bars water from creeping
in, and latches lock the connector around the wires. Blazing Wire Connectors
are vibration-proof and never dangle off the wires.
Say
Goodbye to Traditional Connector Problems- Eliminate Expensive Call-Backs
Because of Faulty Wiring
Professionals
generally check the wiring first when examining a faulty pet containment
system because traditional connectors regularly fail to maintain the
connection and protect it from moisture and corrosion. Blazing Wire Connectors
are the solution - They're the economical connectors that make the connection
first and seal it second.
"A poor wire connection will always lead to an expensive and
time-consuming call back. A call back takes time and money out of your
pocket... Unlike ordinary twist-on wire connectors that traditionally cause
gaps into which moisture can enter and accumulate, Snaploc wire connectors are
100-percent water resistant."
--Tech Times, Official quarterly of Irrigator Technical Training School, CA
("Snaploc...Innovation at Its Best!", Fall 2001)
Blazing
Wire Connectors Installation Instructions
(Formerly known as SNAPLOC Low-Voltage Wire Connectors.)
Additional
Tools Required: None.
Strip
wires 3/4" and group bare wire ends together. No pre-twisting necessary
with solid wire. Pre-twist stranded wire. If using both wire types, wrap
stranded wire around solid wires (see illustration 1A).
Insert
wires through flexible sealing fingers and bend wires into either
"V-Channel".
Push
inner sleeve into pre-filled outer sleeve until double-locked. Pre-filled
silicone fully waterproofs the connection. Do not reuse connector.
|
|
|
Return to Catalog
|
